| Power supply voltage |
100–240 V AC, 50/60 Hz |
| Power consumption |
≤ 20 VA (at 220 V) |
| Input |
Thermocouple, RTD, DC voltage/current |
| Indication accuracy |
±0.1% FS |
| Sampling rate |
50 ms |
| Input correction |
zero and span adjustment, square root extraction, filter |
| Auxiliary analog input |
1 point among 1–5 V, 0–5 V, 0–10 V
For motor-operated valve control: potentiometer 100 Ω–10 kΩ |
| Digital input |
4 points or 9 points
No-voltage contact or transistor input |
| Math function |
Flow rate compensation with temperature and pressure, average, Max/Min selector, input switching |
| Ramp soak |
64 steps, 31 patterns |
| Control types |
Basic, heating/cooling control, motorized valve control |
| Control output |
Relay contact, SSR/SSC drive, 4–20 mA DC, or motorized valve control output |
| Digital output |
2 points or 9 points, SPST or SPDT |
| Analog transfer output |
4–20 mA DC, up to 2 points |
| Transmitter power supply |
Power supply for 2-wire transmitter (17–30 V DC) |
| Control method |
2-degrees-of-freedom PID with auto tuning |
| Control template |
Pre-installed input/output setting and calculation blocks |
| Control mode |
Auto, manual, or remote |
| Alarm |
Up to 8 points |
| Alarm type |
PV (high/low, absolute, deviation, zone, change rate), SV high/low, device error, hold, latch, excitation/non-excitation |
| Alarm output |
can be allocated to digital output |
| Communication (option) |
RS-485 (Modbus) |
| Front keys |
4 keys (including user-defined key), with key lock function |
| Display |
LED, 5-digit |
| Front structure |
IP66, NEMA-4X equivalent |
| Dimensions and weight |
96 (W) × 96 (H) × 81.5 (D) mm, approx. 500 g |
| Mounting method |
Panel mount |
| External wiring terminals |
M3 screw terminal |
| Parameter loader software |
Supported OS: Windows 2000, Windows XP, Windows 7
Empty hard-disk capacity: 100 MB or more
Dedicated USB cable is option.
Software can be used via RS-485 (Modbus) network. |
